ALcom AT6600, Инструкция по эксплуатации

Страница: 4 / 14

 The cursor of day will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm and enter
next step.
 The cursor of hour will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm and enter
next step.
 The cursor of minute will blink, press UP/- or DOWN/+
button to adjust, press SET button to confirm, then finish
the setting.
 After you finish above setting, LCD will show the set
date and time and show the next available menu.
 Press DEL button to exit.
b) Set the local area code
(Not applicable for use in Singapore)
 On-hook state, press SET button once, SEt 1 dAtE
shows in the LCD, press UP/- button once, SEt 2 COdE
will show in the LCD.
 Press SET button to confirm, COdE ------ will display,
and the first cursor “-“ will blink
Note:The previous code will be shown if you had set before.
 Press UP/- or DOWN/+ button to adjust the number
from 0 to 9.
 Press SET button to confirm and enter the second digit,