User instructions
1. Unscrew end cap.
2. Place provided Li-ion battery into chamber.
a. Remove the transparent protective foil
b. Positive pole towards the head.
3. Screw end cap back on the unit.
4. Press button to operate.
Power on:
When off, press the button firmly to turn on the flashlight.
4 different light modes:
Press button firmly, so you hear a click, to power on in 100% white light mode.
Press button 1x gently to activate 50% white light mode
Press button 1x gently to activate 100% UV-A mode
Press button 1x gently to activate 50% UV-A mode
Power off:
Press button firmly, so you hear a click, to turn power off.
Warranty
24 months
warranty on mechanical and electrical failures. Damage
due to misuse and negligence falls outside the scope of the warranty.
1
2
3
4
2a
2b
Maintenance and attention points:
1. Only the supplied high performance rechargeable Li-ion battery MUST be used.
2. Avoid contact between chemicals and corrosive gasses.
The
DUAL-II
POWERLIGHT
is water resistant.
3. Users should lubricate the end cap screw thread once per year
to ensure smooth operation and a water tight sealing.
4. Use a soft brush and alcohol to clean, when required.
5. If the
DUAL-II
POWERLIGHT
is opened for repair, the warranty is void.
In case of a technical problem, please contact Alcochem.
6. If the battery needs to be recharged, use only an approved USB charger..
Battery charging time takes from 4 to 8 hours.
Safety Precautions
1. Avoid direct exposure to eyes, as the high intensity UV-A and White
light beams, may harm your eyes.
2. This
DUAL-II
POWERLIGHT
is not a toy, please keep children away from it.
3. Only use Li-ion batteries sourced from Alcochem and designed for this
DUAL-II
POWERLIGHT
. Use of other batteries may cause permanent damage to
the
DUAL-II
POWERLIGHT
.
4. Remove the battery if unused for a long time, to avoid battery leakage which
may damage other components.
Specifications
Light source
: 5 Watt white Cree LED XPG2 S3 + 5 Watt UV-A LED
Power Supply
: Rechargeable Li-ion battery, type 18650
Size
: 150 mm x 27-35 mm / 5.9 x 1-1.4 inch
Weight
: 134 g. (excluding battery)
Switch :
Base switch (sealed silicon) in black color
Colour/Material : Black / Aluminium T6061TIII hard-anodized finish
Treatment
: Anti-abrasive finish
Protection level : IP67 (Protected against water submersion)
Certificate
: Complies to IEC report (IEC 60598-2-8)
Drop test
: 1.5 m / 5 ft
Included
: Flashlight, Battery, Carrying strap, Belt holster,
USB-C cable, Power adapter
