Page 2 of 10
EPH-N00-06020
1-26-00
LIMITED WARRANTY AND REMEDY
Alumax Bath Enclosures warrants to its dealers, customers, and all subsequent purchasers
and users, that the products supplied by it shall be free from material defects in material
and workmanship for a period of one (1) year after shipment, provided they are installed
and maintained according to Alumax Bath Enclosures' recommended practices and
installation instructions. This warranty shall apply only to defects appearing within one
(1) year from the date of shipment, and provided that Alumax Bath Enclosures is
promptly notified in writing of such defects. The sole and exclusive remedy with respect
to the above warranty or with respect to any other claim relating to defects or any other
condition or use of the products supplied by Alumax Bath Enclosures, however caused,
and whether such claim is based upon warranty contract, negligence, strict liability, or
any other theory, is limited to repair or supply of such products, or repayment by Alumax
Bath Enclosures of the purchase price paid for it, at Alumax Bath Enclosures' option.
Alumax Bath Enclosures does not make any other representations or warranties, express
or implied, including, but not limited to, any implied warranty of merchantability and
any implied warranty of fitness for a particular purpose. In no event shall Alumax Bath
Enclosures be liable for special, direct, indirect, or consequential damages, including, but
not limited to, loss or use of profits.
Dealers agree to pass on to its customers and users in writing Alumax Bath Enclosures'
Warranty and Remedy as set forth above.
Laws and building and safety codes governing the design and use of bath enclosures vary
widely. Alumax Bath Enclosures does not control the selection of product configurations,
operating hardware or glazing materials, and assumes no responsibility therefor.
INSTALLATION NOTES
Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts
using the instruction sheets as a reference. Before discarding the carton, check for small
hardware bags that tend to fall to the bottom of the box. If any parts are damaged or
missing, refer to the descriptions noted in the instructions when contacting your dealer
for replacements.
Handle the glass panels carefully and protect the edges. Safety tempered glass is very
resistant to breakage, but it can be broken by banging the edges against a hard surface.
The sharp corners of the panels can damage tile and floor surfaces, so do not remove any
protective devices until you are ready to install the glass.
Please wear safety glasses whenever drilling or cutting. When drilling holes in ceramic
tile or marble, use a center punch and hammer to carefully break the surface glaze so the
drill can start without skidding.
To install your Alumax StikStall Shower Enclosure you will need the following: tape
measure, level, #2 Phillips screwdriver, drill, 1/8" and 3/16" drill bits, 3/16" wrench,
hacksaw, mallet or hammer, wood block, razor or sharp knife, pencil, glass cleaner, and
caulking (clear silicone recommended). Optional tools include a miter box for cutting
parts to length, files, center punch and masking tape.
