ALCO SOLO LB 4250, Перевод оригинальной инструкции по эксплуатации

Страница: 30 / 284

GB
30 LB 4250
Start-up
3. Check the fastened blowing tube to ensure it
is seated firmly.
5 START-UP
5.1 Charging the rechargeable battery
NOTE
For detailed information, heed the sepa-
rate operating instructions for the re-
chargeable battery and for the charging
unit.
NOTE
When charging, the rechargeable bat-
tery is protected from overcharging due
to automatic detection of the charge sta-
tus and thus can remain connected to
the charging unit for some time, but not
permanently.
NOTE
Fully charge the rechargeable battery
before using it for the first time. The re-
chargeable battery can be charged in
any charge status. Interrupting charging
does not damage the rechargeable bat-
tery.
6 OPERATION
WARNING!
Risk of injury due to detaching appli-
ance parts
Appliance parts detaching during opera-
tion can lead to serious injury.
■
Before switching on the appliance,
check that all appliance parts are
firmly attached.
6.1 Connecting the rechargeable battery
belt system (02) to (05)
Connect the rechargeable battery belt system ac-
cording to the illustration (02) to (05).
6.2 Inserting the rechargeable battery (06)
Inserting the battery
1. Push in (06/a) the rechargeable battery
(06/1) into the rechargeable battery belt sys-
tem (06/2) until it locks.
Pull out the rechargeable battery
1. Press and hold the unlock button (06/3) on
the rechargeable battery (06/1).
2. Pull out (06/b) rechargeable battery (06/1).
6.3 Establishing the voltage supply (07, 08)
Mounting the connecting cable
1. Align the first connector of the connecting ca-
ble (07/1) to the guiding pin and guide slot of
the rechargeable battery belt system connec-
tor (07/2), join, and turn slightly clockwise un-
til the locking and unlocking switch (07/3) au-
dibly engages.
2. Align the second connector of the connecting
cable (08/1) to the guiding pin and guide slot
of the connection socket, push (08/a) into the
connection socket of the machine (08/2), and
turn slightly clockwise until the locking and
unlocking switch (08/3) audibly engages.
Dismounting the connecting cable
1. Pull locking and unlocking switch (07/3) back-
wards (07/b), turn the connector slightly to
the left and pull out (07/c).
2. Pull the locking and unlocking switch (08/3)
backwards (08/b), turn the connector slightly
to the left and pull it out (08/c) of the connec-
tion socket of the machine (08/2).
6.4 Operating the leaf blower (09, 10)
CAUTION!
Risk of injury and damage to property
Persons or animals can be injured and
soiled by the air jet and blown away ma-
terial.
■
It is essential to make sure that the
air jet and blown away material does
not negatively affect persons or ani-
mals or damage objects.
■
Note the wind direction.
NOTE
Never work against the wind to ensure
that you and persons behind you are not
soiled.
1. Stand securely.
Switching on the leaf blower
1. Press the On/Off switch (09/2). The leaf
blower runs.