C
A
U
TI
ON
S
- ELECTRICAL HAZARD:
Disconnect power from
equipment prior to making any internal adjustments.
- Service should only be performed by quali
fi
ed
personnel.
- FRAGILE:
Inspect the equipment prior to installation.
- Do not install the equipment if damage is apparent.
- Do not attempt to disassemble this equipment.
- If damaged, return to the supplier.
- ELECTROSTATIC HAZARD:
This is sensitive electronic
equipment.
- Apply safe ant-static practices when handling this
equipment.
- CIRCUIT LIMITATIONS:
The maximum number of
devices connected to a single alarm zone is limited
by the control and indicating equipment, and may
be limited by local regulations.
I
N
TR
ODUC
TI
ON
- CFS-MCP300 manual call points connect to non
addressable fire detection control and indicating
e
quipment, or to addressable fire detection control
and indicating equipment that can accept non
addressable devices .
- These instructions provide trained installation guide
to personnel with details to install and commission
MCP300 manual call points for optimum
performance.
PREPARATION
-
Before commencing installation, ensure all equipment
and tools to mount and connect the equipment are
available, such as drills, mounting screws, cables
and ladders.
-
NOTE
:
The unit comes separated from the back-box,
ready for installation. However, if necessary, separate
the front face from the body by inserting the reset
key and gently pulling the lower portion of the front
face down and away from the body. Removing the
operating element will expose the screws that hold
the body to the back-box.
OR
OR
OR
OR
OR
OR
OR
OR
CONVENTIONAL FIRE ALARM SYSTEM
intelligent solutions
intelligent solutions
