4.
Screw the two back rim clamps into the back seat brackets and adjust seat back to desired height.
For
stability, ensure that seat back is adjusted to the same height on both sides.
Info: For certain situations such as postoperative, hip conditions or arthritis, seat back can be
adjusted slightly higher than seat front.
Locking Clamp models
only:
Tighten the wing nuts until the sides of the clamps are secure against the
sides of the toilet bowl rim.
OPERATION
WARNING: Always ensure the raised toilet seat is securely installed and fits tightly on toilet
bowl before use.
WARNING: Users with limited physical capabilities should be supervised or assisted when
using raised toilet seat.
MAINTENANCE AND CLEANING
Loosen, retighten, and check for secure fit of raised toilet seat weekly. To clean toilet seat, wash with soap
and water or a mild household detergent and rinse with clear water. Ensure the toilet seat is rinsed well
before use.
If moisture accumulates inside raised toilet seat, do the following:
1. Remove toilet seat from toilet bowl.
2. Turn toilet seat upside down and tilt toward drain opening.
3. Rotate until drain opening is facing downward and moisture drains from toilet seat.
4. Allow toilet seat to air dry for several hours.
WARNING: Inspect the toilet seat weekly as described above and tighten it as needed to
ensure secure installation.
