The Product
8
DAC, for best results, should be mounted on a solid flat surface. At all times this surface should be
level. The Product
8
DAC should also be placed in a position free from direct sunlight, dust, heat and any source of
humidity.
POSITIONING
The Product
8
DAC comes with an IEC mains lead fitted with the relevant plug type for the country of use. If there is
any need to change this then follows the relevant instructions for the plug type used.
There is an external replaceable fuse on the rear of the unit: refer to specifications for fuse value.
Never replace with a different value.
Be sure that your system is switched off whilst connecting / disconnecting any leads.
MAINS POWER CONNECTION
P
RODUCT
8
24B
it
192KH
z
DAC
POWER
1
2
3
4
5
There are 6 control buttons and one intelligence display on the fascia. The
P
OWER
button will either fully power
up the Product
8
DAC or be completely switch off. The buttons indicated
1
to
5
are the input selectors and
which will allow you to toggle between the five inputs provided.
The intelligence display on the other side of the fascia will be similar
to the one shown on the right. As soon as the Product
8
DAC is
switched on, the unit will self test and initialize. Once this process is
completed, ‘
UPSAMPLING 24BIT/192KHz
’ will be shown on the
first line of the display and input ‘1-RCA’ will be selected
automatically. This means the Product
8
DAC is switched on and
having the ability to upsample the signal input.
The input which you have selected will be shown on the left bottom
corner of the display (as indicated). And the received signal frequency
through this input is shown on the other side. However, ‘NO SIG’ will
display if there is no signal thought the input you selected.
CONTROLS
INITIALIZING
PLEASE WAIT
UPSAMPLING 24BIT/192KHz
1 - RCA 96KHz
Input
selected
Received
Signal Frequency
UPSAMPLING 24BIT/192KHz
1 - RCA NO SIG
