background image

system notification messages. Example: [email protected]

Auto Provisioning

Set to Yes.

MAC Address

Enter Alcatel phone MAC address. Example: 001565FF1536. MAC address can be found
at the back of the phone.

Click on the Save button.

Registering Phone

This chapter describes how to register Alcatel phone using DHCPTFTP or HTTP & HTTPS.

DHCP

Configure DHCP

Make sure your DHCP router is configured to use option 66 to automatically instruct phones

with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.

Phone first boot or user initiated reboot

Auto provisioning process will start during phone first boot or after reboot process has been

initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.

TFTP or HTTP & HTTPS

Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.

Enter username and password and press Confirm button. 

NOTE:

 Factory default login

details are username: admin and password: admin.

Click on Upgrade tab.

Click on Advanced link in the submenu.

Choose what server type you intend to use: HTTPHTTPS and Trivial FTP

NOTE:

 Our

recommendation is to use the HTTP.

Enter http:// or https:// followed by Hostname or IP Address, followed then by
/prov in the Provisioning Server field.

Содержание TEMPORIS IP 200












Отзывы: