Alcatel ONETOUCH FIRE 4012A, Руководство пользователя

Страница: 8 / 30

13 14
Charging the battery
Connect the battery charger to your phone.
Make sure the battery is correctly inserted before connecting the •
charger.
When using your telephone tor the first time, charge the battery fully
•
(approximately 5 hours).
The charging status bar will not float if your battery is excessively
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch
off Wi-Fi, GPS, Bluetooth or background running applications when
not in use; reduce the backlight time, etc.
Power on your phone 1.2.2
Hold down the Power key until the phone powers on, unlock your phone
(Slide up and touch unlock icon , passcode) if necessary and confirm.
The Home screen is displayed.
Power off your phone 1.2.3
Hold down the Power key until the pop-up menu appears, select Power
off .
Home screen 1.3
Home screen is provided in an extended format to allow more space for
adding applications. Slide the Home screen horizontally left and right to
get a complete view of the Home screen. Orange line on the top left and
right of the screen indicate which screen you are viewing.
Status bar 1.3.1
From status bar, you can view both phone status (on the right side).
GPRS connected
Receiving location data
from GPS
GPRS in use Roaming
EDGE connected No SIM card inserted
EDGE in use Vibrate mode
3G connected Ringer is silenced
3G in use Battery is very low
HSPA (3G+) connected Battery is low
HSPA (3G+) in use Battery is partially drained
Connected to a Wi-Fi
network
Battery is full
Bluetooth is on Battery is charging
Connected to a Bluetooth
device
Headset connected
Airplane mode No signal (gray)
Alarm is set Signal strength (white)
GPS is on