Alcatel OneTouch BoomBand, Руководство пользователя

Страница: 17 / 21

17
Troubleshooting
Please refer to the instructions below before contacting our after-
sales service:
1. Pairing Failures
Since signal interference may occur with Bluetooth connections, the
pairing times may differ from case to case. If pairing attempts keep
failing, please try t he following suggestions before re-connecting:
A. Reboot Bluetooth;
B. Reboot your cellphone;
C. Check whether it is charged;
D. Log out of your BoomBand and log in again.
2. Battery not Charged
Please check whether the Corebox inserted correctly into the
charger (refer to the picture in section 1.2).
After the battery is totally consumed, it will enter a pre-charging
period. After 3 to 5 minutes' charging, it will enter a normal charging
period (the charging light will indicate normally).
3. Vibration and LED lights not working
Charge and confirm that the battery works, then start pairing. If the
pairing fails, refer to “Pairing Failures”. If the pairing succeeds, check
the indicator lights and the vibrator by knocking.
4. Unexpected vibration or blink: this may be caused by misoperation.
5. Factory reset
If the instructions above do not solve your issue, try resetting your
Corebox as a last resort. Fit the Corebox into the charger, then
insert a paper clip or similar alternative into the Reset hole. Push
slightly until a click is heard, then all 5 LED indicator lights will blink
together, followed by the 1st light blinking.