Alcatel One Touch Snap 7025, Руководство пользователя

Страница: 10 / 78

17 18
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
Make sure the battery is correctly inserted before connecting the •
charger.
When using your telephone for the first time, charge the battery fully
•
(approximately 5 hours).
You are advised to fully charge the battery ( ). Charging status is
indicated by the percentage on screen while the phone is powered off. The
percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
Power on your phone 1.2.2
Hold down the Power key until the phone powers on, unlock your phone
(Slide, PIN, password, Face unlock or pattern) if necessary and confirm.
The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store
this information in a safe place when not in use.
Installing or removing the microSD card
one touch 7025
one touch 7025D
To install, please open microSD card slot first, and then place the external
microSD card into the slot with the gold contact facing down. To remove
the external microSD card, please open microSD card lock and take it out
from the slot.
Before inserting/removing the microSD card, you should ensure the
phone is off, to protect it from corruption or damage. In addition,
regularly removing or inserting the SD card may cause the phone
to restart.