13
14
•
Modification or repair performed by individuals not authorized by TCL
Communication (US), Inc. or its affiliates;
•
Acts of god such as inclement weather, lightning, power surges, fire,
humidity, infiltration of liquids or foods, chemical products, crash, high
voltage, corrosion, oxidation;
•
Removal or altering of the wireless device’s event labels or serial
numbers (IMEI);
•
Damage from exposure to water or other liquids, moisture, humidity,
excessive temperatures or extreme environmental conditions, sand,
excess dust and any condition outside the operating guidelines;
•
Defects in appearance, cosmetic, decorative or structural items such as
structural damage;
•
Damage as result of physical abuse regardless of cause.
•
If the device is Rooted devices.
There are no express warranties, whether written, oral or implied, other
than this printed limited warranty or the mandatory warranty provided by
your jurisdiction. In no event shall TCL Communication (US), Inc. or any of
its affiliates be liable for incidental or consequential damages of any nature
whatsoever, including but not limited to commercial loss, to the full extent
those damages can be disclaimed by law. Some locations do not allow the
exclusion or limitation of incidental or consequential damages, or limitation
of the duration of implied warranties, so the preceding limitations or
exclusions may not apply to you.
1
Getting started .....................
1.1
set-up
Removing or installing the back cover
Inserting or removing the sIm card
(1)
You must insert your SiM card to make phone calls. Please power off your
phone and remove battery before inserting or removing the SiM card.
Place the SiM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
and slide it out.
(1)
Check with your service provider to make sure that your SiM card is 3V or
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your
service provider.
