Make sure your headset is
paired with Temporis
IP300 or Temporis IP700G
telephone base.
Check the installation of
your Temporis IP300
orTemporis IP700G
telephone base.
This symbol means that your inoperative
electronic appliance must be collected
separately and not mixed with the
household waste. The European Union has
implemented a specific collection and recycling
system for which producers' are responsible.
This appliance has been designed and
manufactured with high quality materials and
components that can be recycled and reused.
Electrical and electronic appliances are liable to
contain parts that are necessary in order for the
system to work properly but which can become a
health and environmental hazard if they are not
handled or disposed of in the proper way.
Consequently, please do not throw out your
inoperative appliance with the household waste.
If you are the owner of the appliance, you must
deposit it at the appropriate local collection point
or leave it with the vendor when buying a new
appliance.
(a)- If you are a professional user, please follow
your supplier's instructions.
(b)- If the appliance is rented to you or left in your
care, please contact your service provider.
Please help us protect the environment in
which we live!
Hereby, Atlinks declares that Alcatel IP70H is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Behind the neck band
To attach the neck band to the headset:
1. Remove any headset attachment (earbud
excluded) currently connected to the headset.
2. Insert the earpiece into the loop of the ear pad.
3. Push the earpiece inward until it clicks into
place.
4. Place the neck band around your neck with
the ear pads over your ears.
5. Adjust and rotate the angle of the headset
until the microphone is pointing towards your
mouth.
To remove the neck band from the
headset:
• Hold the headset with one hand and the ear
pad with your other hand. Twist and pull the
headset until it separates from the loop of the
ear pad.
Use the headset
Make a call
1. Follow the instructions in your telephone
user’s manual for making calls.
2. Press on the headset to join the call.
3. Hang up the handset at any time to leave the
call and the headset continues the call.
Answer a call
• Press on the headset to answer a call.
End a call
• Press on the headset or place the headset
on the charger.
Ringer
The headset does not have an external ringer.
When there is an incoming call, the headset
earpiece rings.
If you have telephones connected to the same
telephone line, you can rely on the ringers of
those telephones to alert you to incoming calls.
Temporary ringer silencing
When there is an incoming call, you can
temporarily silence the ringer in the headset
earpiece without disconnecting the call. The
next call rings normally at the preset volume.
To silence the headset ringer:
• Press MUTE/FLASH on the headset.
Volume control
To adjust the ringer volume:
• When the headset is not in use, press
VOL+/VOL-.
To adjust the listening volume:
• During a call, press VOL+/VOL-.
Call waiting
When you subscribe to call waiting service from
your telephone service provider, you hear an
alert tone from the headset earpiece if there is
an incoming call while you are on another call.
• Press and hold MUTE/FLASH for two
seconds to put your current call on hold and
take the new call.
• Press and hold MUTE/FLASH for two
seconds at any time to switch back and forth
between calls.
Mute
The mute feature allows you to hear the other
party but the other party cannot hear you.
1. During a call, press MUTE/FLASH on the
headset. The headset announces, “Mute on.”
The headset beeps every 30 seconds until
the mute function is turned off.
2. Press MUTE/FLASH again to resume the
conversation. The headset announces, “Mute
off.”
Switch a call between a handset and a
headset
• To switch from a cordless handset to a
headset during a call, press on the
headset, then hang up the cordless handset.
• To switch from a headset to a cordless
handset during a call, press the button you
use to answer call on the cordless handset,
then press on the headset.
Multiple headset/handset use
Headset(s) and handset(s) on the same phone
line can join an outside call at the same time.
The number of headset(s) and handset(s)
that can join may be limited by your telephone
system. Refer to the user’s manual of your
telephone for more information.
To share an outside call:
• When a headset or handset is already on a
call, press on another headset to join the
call.
• To exit the call, press again or place the
headset in the charger. The call continues
until all handsets and/or headsets hang up.
Answer an intercom call
Follow the instructions in your telephone user’s
manual for initiating an intercom call. When
there is an intercom call request from a cordless
telephone to a headset, the headset earpiece
rings if it is not in use.
To answer an intercom call:
• Press on the headset to answer the
intercom call.
Answer an incoming call during an
intercom call
If you receive an incoming outside call during an
intercom call, there will be an alert tone.
• To answer the call, press and hold
MUTE/FLASH for two seconds. The
intercom call ends automatically.
• To end the intercom call without answering
the incoming call, press on the headset.
The telephone continues to ring.
End an intercom call
• Press on the headset or place the headset
on the charger.
General product care
Taking care of your headset
Your cordless headset contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the headset down gently. Save the original
packing materials to protect your headset if you
ever need to ship it.
Avoid water
Your headset can be damaged if it gets wet.
Do not use the headset outdoors in the rain,
or handle it with wet hands. Do not install the
headset charger near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your headset
Your headset has a durable plastic casing that
should retain its luster for many years. Clean
it only with a soft cloth slightly dampened with
water or mild soap.
Do not use excess water or cleaning solvents of
any kind.
Frequently asked questions
If you have difficulty with your headset, try the
solutions below.
My headset
doesn’t work
at all.
Make sure the battery is
securely installed in the
cordless headset, and
charged for at least three
hours.
There is no
dial tone.
Move the cordless headset
closer to the telephone base.
You might have moved out of
range.
The other
party cannot
hear my voice
during a call.
Make sure the mute feature is
not turned on during a call.
Adjust the speaking volume
during a call.
I cannot hear
any ring tone
from the
headset when
there is an
incoming call.
Your headset does not
have an external ringer.
The ring tone can only be
heard through the headset
earpiece.
Common cure
for electronic
equipment.
If the headset does not seem
to be responding normally, try
putting the cordless headset
in its charger. If it does not
solve the problem, do the
following (in the order listed):
1. Disconnect the power to
the headset charger.
2. Remove the cordless
headset battery.
3. Wait a few minutes.
4. Connect the power to the
headset charger.
5. Install the battery again,
and then place the
cordless headset into the
headset charger.
6. Wait for the cordless
headset to reestablish
its connection with the
telephone base. Allow up
to one minute for this to
take place.
Important safety instructions
When using your headset, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock and injury,
including the following:
1. Read and understand all instructions in this
user’s manual. Observe all markings on the
product.
2. Avoid using a headset during a thunderstorm.
There may be a slight chance of electric
shock from lightning.
3. Do not use the headset to report a gas leak
in the vicinity of the leak. Under certain
circumstances, a spark may be created
when the adapter is plugged into the power
outlet, or when the headset is replaced in its
cradle. This is a common event associated
with the closing of any electrical circuit. The
user should not plug the headset charger
into a power outlet, and should not put
a charged headset into the cradle, if the
headset charger is located in an environment
containing concentrations of flammable or
flame-supporting gases, unless there is
adequate ventilation. A spark in such an
environment could create a fire or explosion.
Such environments might include: medical
use of oxygen without adequate ventilation;
industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
4. Do not use this product near water, or when
you are wet. For example, do not use it
in a wet basement or shower, or next to a
swimming pool, bathtub, kitchen sink, or
laundry tub. Do not use liquids or aerosol
sprays for cleaning. If the product comes
in contact with any liquids, unplug any line
or power cord immediately. Do not plug the
product back in until it has dried thoroughly.
5. Install this product in a protected location
where no one can trip over any line or
power cords. Protect cords from damage or
abrasion.
6. If this product does not operate normally, see
the Frequently asked questions section of
this user’s manual. If you cannot solve the
problem, or if the product is damaged, refer
to the Limited warranty section. Do not
open this product except as may be directed
in your user’s manual. Opening the product
or reassembling it incorrectly may expose
you to hazardous voltage or other risks.
7. Replace batteries only as described in your
user’s manual. Do not burn or puncture
batteries — they contain caustic chemicals.
8. This power adapter is intended to be
correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold
the plug in place if it is plugged into a ceiling,
an under-the-table or a cabinet outlet.
Environment
Declaration of Conformity
Technical
Frequency
control
Crystal controlled PLL
synthesizer
Transmit
frequency
1881.792-1897.344MHz
Channels
5
Operating
temperature
32°F - 122°F
0°C - 50°C
Power
requirements
Charger: 6V DC @ 400mA
Replacement battery:
3.7V 240mAH
© ATLINKS 2014 - Reproduction prohibited.
The Manufacturer reserves the right to modify the
specifications of its products in order to make technical
improvements or comply with new regulations.
Alcatel is a registered trademark.
Alcatel logo and Alcatel name are trademarks of
Alcatel-Lucent and used under license by ATLINKS.
ATLINKS Europe
22 quai Gallieni
92150 Suresnes- France
www.alcatel-business.com
Model No. : Alcatel IP70H
A/W No.: 10001115 Rev.0 (EN)