Alcatel AST570, Руководство пользователя

Страница: 247 / 300

Introduction
Procedure
Note
20 Maintenance - Speed Touch ToDefaults
247 / 300
3EC 17766 AAAA TCZZA Ed. 04
20.2.2 PingtoDefaults
A second software method to reset all settings to the original
defaults is the PingtoDefaults

.
The technique is identical to that used for the PingofLife

, except
that another MAC address is used, i.e.
01–90–D0–80–01–FF
.
Proceed as follows:
1. Turn off the AST570 .
2. Open a commandline (DOS) window (Windows OS), or a
terminal window (UNIX, Linux) on a PC.
3. Add a static entry to the ARP cache, according to following
syntax:
arp –s <any IP address> 01–90–D0–80–01–FF
<any IP address>
can be any address within your subnet
as long as it is not used by any other member of your local
network.
4. To verify whether this step was successful execute
arp –a
5. Initiate a continuous pinging, by executing following
command:
ping –t <any IP address>
6. Turn on the AST570 .
7. After the AST570 finished its POST, it will perform a reset to
default settings.
8. You must clear the entry in the ARP cache by issuing
the following command:
arp –d <any IP address>
9. For a nonwired network, reauthenticate your WLAN client
adapter.
10. If needed, reconfigure the AST570 IP address, e.g. via a
PingofLife

and its Wireless LAN settings.
The used
<any IP address>
to perform a PingtoDefaults

is not
assimilated by your AST570 .