Alcatel-Lucent ALE M3 Скачать руководство пользователя страница 52

Страница: 52 / 227

ALE M3-M5-M7-M8 DeskPhones Administrator Guide

5.1.4 Logging in the Web/Phone User Interface with Different Access Levels

When the user access level is enabled, you can log in the web/phone user interface with different access

levels.

To login in the web user interface with different access levels:

1. Enter the IP address in the address bar of the web browser on your PC and then press the

Enter

key.

2. Enter the user name (admin/var/user) and password (admin/var/user) in the login page.
3. Click

Login

to log in.

When logging in with different access levels, you will have corresponding permissions of the web user
interface.

To login in the phone user interface with different access levels:

1. Press Menu

→

User Mode

2. Press the left or right navigation button, or the

Switch

soft key to select the desired access level in

the User Type field.

3. Enter the password in the Password field.

4. Press the Save soft key to accept the change.

You will have corresponding permissions of the phone user interface when logging in with different access
levels.

Содержание ALE M3




































































































































































































































Результаты поиска

Содержание ALE M3

Отзывы:

Alcatel-Lucent ALE M3, Руководство администратора, Страница: 52 / 227

Результаты поиска

Содержание ALE M3

Отзывы: