• You have all the elements described on the packing list and the card going to be installed is the correct one.
• The device permits the upgrading (the label located on the underside of the device indicating the type of hardware
should say: HW: ATxxx-yyy , i.e. one of the routers from the OA58XX family).
• You have the necessary tools:
Screwdriver.
Screws and washers.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous.
To prevent electric shocks, before installing, handling or opening the equipment covers, con-
nect and disconnect the cables as follows:
(1)
Disconnecting the device:
• Switch off the router. To do this put the ON/OFF switch in the OFF position.
• Disconnect the power supply cable from the device.
• Disconnect the data cables.
(2)
Remove the device from the workplace and place it in a stable, safe place where it can be easily accessed and
handled.
(3)
Remove the screws from the side panel in order to be able to dismantle the flap that provides the access to in-
stalling the expansion cards. See Figure 5.
Fig. 5: Removing the screws for the top panel flap
(4)
Once the screws have been removed, in order to remove the flap you need to slide it, disconnecting the
grooves that ensure the flap is attached to the top panel, and finally remove it by lifting it. Put it in a safe place.
(5)
Find the place where the xDSL expansion board needs to be located.
Alcatel-Lucent Enterprise
3 Installation Procedure
XDSL Expansion Card for OA58XX
7
