Getting started with the 8378 DECT IP-xBS solution
on OXO
8AL90357ENAAed01
28
/
37
8.8 Security
There is no DECT ciphering on OXO
The configuration of IP security:
There is no security on IP side on the first release. Only the xBS FW is signed and the WBM
access has credential (login/password).
8.9 Call server configuration
OXO/OMC configuration:
More details can be found in the “OXO Mobility” documentation
The IP-xBS solution is available since R3.0.
All the requested files and binaries are part of the OXO Call Server software delivery.
The configuration is completely managed by OMC.
To complete a simple IP-xBS deployment, the following steps must be followed:
1) Configure a DHCP server:
IP-xBS base stations get their IP address from the DHCP IP Range of the ALU
IP Phones.
⇒
OMC
→
Hardware and Limits
→
LAN / IP Configuration
→
DHCP
2) Set the PARI of the system:
⇒
OMC
→
Dect
→
DECT / PWT ARI / GAP
→
ARI
3)
Activate the “auto provisioning” for IP phones:
⇒
OMC
→
Subscribers / Base stations List
→
Auto Provision
Note: IP-xBS base stations can also be manually provisioned in the Call
Server
4) Plug at least one IP-xBS base station (will become the Data Sync Primary IP-
xBS in the first site)
IP-xBS base stations are automatically provisioned in the Call Server when
requesting their configuration file startipxbs-<@MAC>.
The base station is created with the MAC address defined in the name of the
requested file and the received source IP address.
The new base station is attached to the first cluster in the first site.
5) Add handsets (see section 5.2.6)
DECT handsets must be created in the Call Server by the means of OMC
before registering them to the DECT subsystem (IP-xBS and TDM IBS). The
provisioning of DECT handsets is the same for IP-xBS and TDM-IBS. A
handset registered over an IP-xBS or TDM IBS is also operational with the
same level of services when connected to a TDM IBS respectively IP-xBS.
Create a DECT access:
⇒
OMC
→
Subscribers / Base stations List
→
Add
→
Dect set
