DISPOSAL.
The crossed dustbin symbol reported on the product indicates that,
at the end of its useful life,
the product must be collected separately from other waste. Therefore, the end-user must deliver the product to the
collection centers for electric and electronic waste (WEEE). Alternatively, the product can be returned to the retailer
shop when buying a new product of the same type, in a ratio of one to one, or one to zero for products having exter
-
nal dimension no more than 25cm. A separate collection guarantees the recovery and reuse of the materials used in
manufactoring the product, contributes to the respect of the environment and the protection of health by preventing
pollution and reducing the need for raw materials.
2
BATTERY CHARGING
When the emitted light is significantly reduced, turn off the lamp and recharge the battery as soon as
possible.
Charging Procedure
1. Open the
protection cap
and make the USB Type-C socket accessible for charging. Connect the lamp
to a charging device with an USB port using the supplied USB-Type-C cable. As a charging device,
you can use the USB port of a PC, a Power Bank device or any charger / adapter equipped with a 5V
DC USB port.
2. The
indicator LED
, located inside the lamp and close to the USB type-C port of the lamps, lights up red
indicating that the charging process has started.
3. At the end of the charging proicess the
indicator LED
lights up green, iindicating that the charging
process is complete and the battery is fully charged.
4. To use the disconnect the USB Type-C cable and close the
protection cap
.
Note:
all pictures shown in this manual are for illustration purpose only, are not contractual and may
differ from the actual product.
INTRODUCTION
Thank you for choosing an AlcaPower product. You can be sure that the product you have purchased is one
of the best that is currently available on the market. Before using the product, please read this manual very
carefully and keep it for further reference.
This product is a rechargeable table lamp, dimmable with a simple design that works without the need to
be connected to the mains.
TECHNICAL CHARACTERISTICS
LED panel
3.5W 48 LED SMD 2835
Color temperature
3000K
Luminous flux
270lm
CRI
80
Dimmer range
10%~100%
Battery pack
3.7V 5200mAh Li-Ion, 2 x Li-Ion 18650
Charging time
6~7h
Runtime
12~15h
Charging port
5V 1A USB Type-C
Operating temperature
-10°C ~ 60°C
Switching cycles
12500 cycles
Lifespan
25000h
Ingress protection grade
IP54
Body material
Aluminium
Reflectors material
PMMA (Plexiglas)
Dimensions
Ø100x380mm
Weight
842g
1
USB Type-C input
for charging
USB CABLE INCLUDED
Aluminium body
ON/OFF Touch button and dimmer
WARNINGS
•
Recharge the battery every 3 months if the lamp is not used for a long time.
•
DO NOT LEAVE the battery connected to the charging system for a long time, maximum 2/3 days. You risk
damaging the battery and / or the lamp.
•
Do not leave the lamp unattended while charging.
•
Do not throw the lamp or battery into fire.
•
Do not try to insert metal objects into the USB type-C connector or inside the lamp.
•
Do not attempt to access or open the lamp.
•
Do not leave the lamp being charged in places with high temperatures or under the sun.
•
Using the lamp and the built-in battery in extreme conditions, such as high temperatures, deep dischar
-
ges and / or overloads, can reduce their lifetime.
(*) Note:
every time the lamp is turned on, it lights up with
the last brightness level set.
(**) Note:
after adjusting the light intensity in one direction,
by long press button again, the light intensity is adjusted in
the opposite direction.
100%
10%
(*)
SINGLE TOUCH ON/OFF
Turn the lamp on and off.
LAMP OPERATION
To turn the lamp on, off and adjust the, use the touch
button on the top of the lamp.
LONG PRESS
Increase the light intensity
(**)
(**)
LONG PRESS
Decrease the light intensity
