Alcad ZA-431, Быстрый старт

Страница: 3 / 6

This will activate the processor to be programmed. Press arrow down on programmer to
get the following screenshot
press arrows to select your processor either ZA-331 or ZA-431 then press arrow down .
You should see the screen below which gives you the option Analogue or digital. Select digital
and press transmit button
You will then see the screen. Now press the arrow down
5 times to scroll down until you see the screenshot shown below.
Using the arrow navigate to the screen below “Table channel frequency”.
Then press the down arrow 4 times until you see the screen below which requires you to
enter the centre frequency of the carrier you are processing without the offset. You
increase/decrease the values using the arrows .The Australian Analogue/Digital
frequency table can be seen on the next page.
PRG indicator LED
will come on orange
IR Sensor