QUICK PROGRAMMING GUIDE 912-DMH DVB-C
ENG
Start/on
DMH-101 HDMI to DVB-T modulator
DMH-301 HDMI to DVB-C modulator
Select series
Configure module
912-DMH HDMI to DVB-C modulator
NIT Table
Select series
Main menu
Press the Power On key of the PS-011 to start up
the system.
Set the programming switch of the 912-DMH module to the ON position. The programming indicator will
now light up and remain lit.
Choose Select Series to select the programming
series.
Select the series: DMH-301 HDMI to DVB-C
modulator.
To commence programming the module, select
Configure module.
OK
OK
OK
Output
Standard
DVB-C
Program by
Channel
Channel
Frequency
Channel table
BG CCIR
Channel
21
Select the programming mode for the output of
the module: channel or frequency. Then press T to
transmit.
Select the standard for the output channel. Then
press T to transmit.
If the output is programmed by channel, it is possible
to enter the channel using the numeric keypad.
Alternatively, you can select a channel from the pull-
down list. When you have confirmed your choice by
pressing OK, press T to transmit.
OK+
+OK+T
OK+
+OK+T
T
OK+
+OK+T
or
Frequency
471.25
MHz
Attenuation
14
dB
If the output is programmed by frequency, enter the
frequency using the numeric keypad. Then press T
to transmit.
Enter the attenuation at the output of the module
using the numeric keypad. Then press T to transmit.
T
T
OK+
+OK+T
or
Symbol rate
1000
KBd
Enter the symbol rate of the output signal using the
numeric keypad. Then press T to transmit.
T
Modulation
64QAM
Select the type of modulation of the output channel.
Then press T to transmit.
OK+
+OK+T
Spectrum
Normal
Normal
Inverted
Select the type of spectrum. Then press T to
transmit.
OK+
+OK+T
