40392 Assembly Instructions
Page 7
MOUNTING INSTRUCTIONS FOR THE ECONOMY LIGHT KIT
1.
Using drill dimension sheet, drill 1.467 (1-7/16) hole in left
side of cabinet. Drill (2) 0.187 (3/16) holes 1.625 (1-5/8)
from center of large hole, one above and one below.
2.
Unscrew ceramic lampholder and install base through hole
from outside and attach gasket and socket from inside.
3.
Attach electrical box to outside of cabinet using 8-32 x 1/2”
machine screws and nut.
NOTE:
Attach ground wire (green)
to one of the screws that holds the box to the cabinet.
4.
Attach neutral wire (white) from power cord to silver screw
on socket base.
5.
Attach black wire from socket base to one of the screws on
the side of the switch.
6.
Attach black lead from power cord to the other screw on the
side of the switch.
7.
Attach switch to box and install cover.
8.
Install light bulb (not included) maximum 60 watt.
