Albrecht MKS LUMBAGO PLUS, Инструкция пользователя, Страница: 5 / 8

2. Individual adjustments
For those patients using the MKS
®
Lumbago plus for the first time it is important
that they learn how to handle it. Putting it on and taking it off should be
practiced.
Wear the MKS
®
Lumbago plus directly on the skin or over a tight-fitting singlet
without any creases. It is recommended that an absorbent singlet be worn to
avoid humidity caused by excessive sweating.
To put on the MKS
®
Lumbago plus please follow the steps below. This will
ensure reliable effectiveness.
Always make sure that the MKS
®
Lumbago plus is a smooth and tight fit.
However, in order to prevent constrictions along the edges it shouldn’t be
over-tightened.
1� Put the MKS
®
Lumbago plus around your waist from the back to the front
making sure that the dark slide-in poket rests inside against your back.
2� Press the band with the fleece on the front down on your stomach and pull
the hook and loop fastener of the
MKS
®
Lumbago plus forward so that you
can feel a slight pressure around your waist.
3� Now press the hook and loop fastener of the tightened MKS
®
Lumbago plus
on the fluffy end of the belt and flatten down the MKS ® Lumbago plus with
your hand.
4� Pull both ends of the additional belt forward until you reach the desired
tension and then attach it onto the body belt through hook and loop
connections.
1 2 3 4
www.albrechtgmbh.com
5
User Instructions