18
English
3.7. Dynamic Range Control (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.
There are 3 levels of compression:
• DRC off - no compression. This is the default setting.
• DRC low - medium compression.
• DRC high - maximum compression.
Press
Menu
>
DRC
> ▲/▼ to select
High, Low
or
Off
>and press
OK
to confirm.
3.8. Station Order
The stations are listed by Alphanumeric, Ensemble or Valid.
Press
Menu > Station Order >
▲/▼ to select Alphanumeric, Ensemble or Valid >and press
OK
to confirm.
3.9. Prune DAB Stations
This option removes the DAB stations in the station list that cannot be received in your area.
4. FM Radio Mode
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System)
information about the station and show (where broadcasted).
To enter FM mode, press
>
FM
>
OK
.
4.1. Selecting Stations
To seek the next available station, press and hold
Tune
. For fine tuning the frequency, short press
Tune
and then ▲▼ buttons to change the frequency in the steps of 0.05MHz.
4.2. Preset a station
DR 825 has 10 preset (favourites) memories for FM, In order to save a FM station, press and hold
. You can also select
Menu
>
Preset Store
>
OK
, then press ▲/▼ to select the memory and
press
OK
.
4.3. Preset Recall
Press to open the favourite list. You can also select
Menu
>
Preset Recall
>
OK,
then press
▲/▼ to select the station and press
OK
.
4.4. FM Display Information
When listening to an FM station you can change the information of the display:
• Radiotext (RT). This is scrolling text information supplied by the broadcaster. Information could
be the name of an artist or music title, DJ’s name, contact details for the radio station etc.
• Program Type (PTY) - Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Station name or frequency - Such as WDR2 or 93.30MHz
• Audio mode – Mono or Stereo
• Time and date - supplied by the broadcaster.
Press the
Info
button to cycle through the different information options.
4.5. Scan Setting
Set to receive strong stations only.
Press
: Menu > Scan Setting > Strong Stations only? > No/Yes
4.6. Audio Setting
The radio will automatically switch between Mono and Stereo, depending on the quality of the signal
being received. You can override this function and switch between “Mono only? No /Yes”.
Press:
Menu > Audio Setting > Mono only? > No/Yes
