www.albrechtgmbh.com
13
User Instructions
2.2.2. Setting the limitation for the wrist hinge
The limitation restricts the range of motion. Extension and the redression range
are limited by the stop screw. Before setting the extension limitation, you must
deactivate the spring tension.
1
Turn the green switch to „off”.
2
Bring the brace into flexion.
3
There are three holes on the side of the CDS
®
housing. The number of
degrees depends on the position of the straightening and limitation range
and can be determined with a goniometer. The stop screw is located in one
of the holes.
Then turn the stop screw with the supplied tool from the CDS
®
housing.
OFF
1
2
3
Before screwing it into one of the three holes, bring the brace into flexion,
so that the holes are freely accessible. Position the stop screw in the desired
position and tighten the screw. The limitation can be adjusted to the treatment
progress with increasing mobility of the patient.
Please be aware that the brace must only be used with the stop screw
positioned and tightened in one of the holes, otherwise the hinge will
be damaged.
