Notes:
· After you store a frequency into the last available channel, --
ch appears instead of a channel number. If you try to store a
channel while --ch appears, Ch FULL appears briefly. In order
to store more frequencies, you must clear some channels. See
“Clearing a Channel”.
Direct Search
You can search up or down from the currently displayed fre-
quency and store the frequency into the monitor memory.
1. Press MANUAL or PGM, then use the number keys and
DLY/. to enter the frequency where you want to start the
search.
Note: To start from a frequency already stored in one of your
scanner’s channels, press MANUAL or PGM, enter the desired
channel number, then press MANUAL or PGM again.
2. Hold down Up or Down for about 1 second to search up or
down from the selected frequency.
When the scanner finds an active frequency, it stops sear-
ching.
3. To store the frequency in the monitor memory, simply press
MON. MON appears on the display.
4. To continue the search, hold down Up or Down for about 1
second.
MOVING A FREQUENCY FROM THE MONITOR MEMORY
TO A CHANNEL
1. Press MANUAL, enter the channel number where you want
to store the frequency, then press PGM. PGM, the frequency
number or 000.0000, and the selected channel number appe-
ar.
2. Press MON. MON and the frequency appear and the chan-
nel number flashes.
3. Press E. MON disappears, the channel number stops flas-
hing, and the scanner stores the frequency in the selected
channel.
MONITORING A STORED CHANNEL
You can continuously monitor a specific channel without scan-
ning. This is useful if you hear an emergency broadcast on a
channel and do not want to miss any details – even though
there might be periods of silence – or if you simply want to
monitor that channel.
Follow these steps to manually select a channel.
