Albrecht AE180H, Руководство по эксплуатации

Страница: 14 / 36

Installing the Belt Clip
1. Place the Belt Clip on
the mounting area on
the back of the scanner,
making sure the holes in
the clip line up with the
threads in the back of
the scanner.
2. Insert the 2 screws into the corresponding holes
and tighten.
CAUTION: Do not tighten the screws too tight. You could
damage the case or clip.
Using the Earphone
The PHONE jack at the top of the AE180H is a standard
3.5mm stereo phone jack. You can use either the supplied
earphone, or a stereo headset of the proper impedance
(32
W
). The output of this jack is monaural audio, but you
will hear it in both headphones of a stereo headset.
IMPORTANT!
Be sure to use only the supplied earphone, or stereo
headset of the proper impedance (32
W
). Use of an
incorrect earphone or other impedance headset may be
potentially hazardous to your hearing.
WARNING: To avoid discomfort or possible
hearing damage, be sure to set the Volume
Control before plugging in the earphone or
proper headphones. A sudden opening of
the Squelch may cause unexpected
loud audio.
11
15
Y:...UB302BH(AE180H).vp
Tue Jul 08 16:23:46 2003
Color profile: Disabled
Composite Default screen