Albrecht AE 77 H, Руководство по эксплуатации

Страница: 18 / 21

18
Troubleshooting
If your
AE 77 H
is not performing properly, try the following steps.
Problem Suggestion
Scanner won’t work. 1. Check the connections at both ends of the AC Adapter.
2. Turn on the wall switch of your room. You could be
using an outlet controlled by the wall switch.
3. Check to see the batteries are installed followed by the
+ and – symbols.
Improper reception. 1. Check the antenna connection or move and reposition
the antenna.
2. Move the scanner.
3. You may be in a remote area which could require an
optional multi-band antenna. Check with your dealer or
local electronics store.
Scan won’t stop. 1. Adjust squelch threshold - refer to page 8, Setting the
Squelch.
2. Check the antenna connection.
3. Check to see if many of the channels are locked out.
If so, the scanner has less chance of finding an active
channel.
4. Review each channel’s frequency to see if it is still
stored in memory and is correct.
5. It’s possible that none of the programmed frequencies
are currently active.
Scan won’t start. 1. Press the key again.
2. Adjust squelch threshold - refer to page 8, Setting the
Squelch.
3. Check to see if all channels are locked out.