Albrecht AE 5290 XL, Руководство по эксплуатации

Страница: 6 / 16

6
Country switch setting before installation
Re-Programming to another
country code
This is possible at any time, even
after installation and when the
radio is in use. The procedure is
the same like Your first setting.
Before You install Your new CB
radio, You should preset the country setting according to the local authority requirements.
Because this radio is used in most cases by truck drivers in central and western Europe, it
comes programmed with the factory setting to 40/40 channels. If You are in a country where
this setting should not be allowed, please use the Mode 03 on the table, 40 FM. Please
consult our Radio Passport (see the chapter “Legal Issues” later in this manual)
40 FM This is former “CEPT” mode, the position which is allowed in most countries.
Here the radio works on the international 40 Channels in FM mode. The Function
switch AM / FM on the front side is disabled in this mode.
40/40 This medium position can be used in those countries, where already all 40
international channels are allowed to be used in AM and FM. AM was traditionally
used by CB from the beginning in the early 60’s in USA, and it is still the
preferred mode of all truck drivers in the world. Please use this mode only in
countries according to the list in the Radio Passport, and please apply for an
individual licence where requested.
80/80(40) This position (right side on the photo) is only allowed to be used in Germany.
Restrictions are still in force in the border regions to other countries (except to
Czech Republic), where transmitting on channels 41 – 80 is not allowed by base
stations or only with a special licence.
Re- Programming to another country code
This is possible at any time, you only need to
• Switch off the radio
• Switch the radio on again, while keeping the SCAN button pressed
• Release the Scan button. In the display a country code between 01 and 05 will appear.
• Select the country code by rotary channel switch
• Switch the radio off and on again.
Notes: the country setting code remains stored until you may change it later, even if power
connection should be interrupted, there will be no memory loss.
Multi Mode Channel Power Modulation
01 80/80(40) 4W/1W FM/AM
02 40/40 4W/1W FM/AM
03 40 4W FM only
04 40/40 4W/4W FM/AM (only Spain)
05 40/40 4W/4W FM/AM (only Poland)