Albrecht 904LL-L Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 36

Albrecht 904LL-L Скачать руководство пользователя страница 32

CDS

®

Knee Brace Flexion

|

Junior

User Instructions

32

4. Cleaning, maintenance and disinfection

The orthosis is designed to be maintenance-free. To
ensure proper operation over the period of treatment
the orthosis should be cleaned regularly (at least every
3 months) or as required, according to the following
instructions.

4.1. Pads and straps

•

All fabrics can be washed by hand at 30° C using water and a
mild detergent and / or disinfectant.

•

Not machine washable.

•

In the case of more severe soiling, a replacement set of textile
parts is available.

4.2. Rods (Hinges)

•

Plastic and aluminium may be wiped with a wet cloth using a
mild detergent or disinfectant.

•

Wipe down surfaces with a cloth soaked with disinfectant.

•

Wet completely, and do not wipe off.

•

Spray inaccessible surfaces.

•

When spraying ensure complete wetting.

•

A mild alcohol-based disinfectant is recommended.

Ask your physician or pharmacist when selecting a disinfectant,
and follow the instructions given by the disinfectant
manufacturer. The Robert Koch list of approved disinfectants
can be found at www.rki.de.

h

Hand wash at 30°C

C

Do not bleach

t

Do not iron

k

Do not dry-clean

y

Do not tumble dry

«
...
30
31
32
33
34
...
»

Содержание 904LL-L





































Отзывы:

Нет отзывов