Albrecht 27884, Руководство пользователя, Страница: 33 / 112

33 English
English
See Section 16.3 Network for detailed network confi gurations.
You can set the network connection at the fi rst start or later.
• Press ( On/Off) to enter standby mode. The time, date and active alarms are shown on
the display.
• If you have set up the network connection and use the DR 884 again within the network, the
connection will be established automatically. If you would like to change the network, call up
Settings to change the corresponding connection.
• Enter the network password using the keypad on the remote control or via ▲ and ▼. If the
desired character is displayed, press ► to navigate to the next entry. At the end of the input,
press OK to confi rm. Alternatively, press ◄ to navigate to the previous entry.
5. Navigation through menus
With the button, you can access the main menu of the DR 884 at any time.
Use the arrow buttons ◄ ► ▲ ▼ to move through the individual menus. Always confi rm a selection
with the OK button. Use the ► button to go to the next menu and use the ◄ button to return to the
previous menu. The possible buttons are shown at the bottom right and left of the display.
5.1. Text entry
When you add the address of an online radio station or your wirless network key, you need to enter
text. It is the same procedure to set the time, date or the alarm.
To enter upper/lower case letters, symbols, or numbers:
1. Press the up/down navigation button to select a character from the following:
A a B b...Z z $ % & # _ ^ ~
、
“ ‘, . : ; ? ! * - + @ < = > { } [ \ ] ( / )
0 1...9
2. Press the right navigation button ► to proceed to the next. Press the enter button when done.
NOTE: When entering numbers the numeric keys on the remote control can also be used.