ALBIN PUMP ALH Series, Инструкция по эксплуатации

Страница: 5 / 49

3 DESCRIPTION
3.1 Identification of the pump
Albin Pumps are identifiable by the pump plate located on the upper bracket. This one includes the type and serial number of the
pump. This serial number leads to all information concerning building materials, nature of the hose, characteristics of the gearbox
and characteristics of the motor. The gearbox as well as the motor include their own descriptive plate on which you can
read the reduction ratio, power and electrical voltage etc.
3.2 Operation principle
PHASE 3
As soon as, at the discharge side, the shoe is detached from
the hose, the other shoe diametrically opposite is already in
compression thus avoiding an internal product leakage. The
product is then successively sucked and pushed due to the
wheel rotation.
PHASE 2
The pumped liquid has now entered the hose. The second
shoe will compress the hose and push the liquid towards
the pump outlet.
PHASE 1
The pump hose is compressed successively by two pressing
shoes assembled on a rotating wheel. The first shoe, by
pressing the walls of the hose, will create a vacuum and at-
tract the pumped liquid into the hose.