manualshive.com logo in svg

ALBIN PUMP AD120, Инструкция по эксплуатации

Поделиться
Скачать
ALBIN PUMP AD120 Скачать руководство пользователя страница 4

4

AD

since 1928

AD

since 1928

1/ INTRODUCTION

1.1 - GENERAL

 
The air operated diaphragm pump series AD is manufactured by ALBIN PUMP and is marketed and sold by 
a net of authorised distributors.

This instruction manual contains important information on the AD range and must be read carefully before 
installation, service and maintenance. The manual must bekept easily accessible to the operator.

 

IMPORTANT !
The pump must not be used for other purposes than recommended and quoted for without consulting 
the ALBIN PUMP distributor.
Liquids not suitable for the pump can cause damages to the pump unit and imply risk of serious 
personal injury

.

 

1.2 - RECEPTION AND STORAGE

1.2.1 - Reception

Remove all packing materials immediately after reception. Check the consignment for damage at once and 
make sure that the name plate/type designation is in accordance with the packing slip and your order. 

In case of damage and/or missing parts a report should be drawn up and presented to the carrier instantly. 
Notify your ALBIN PUMP distributor. 

All pumps have the type specification (Type) printed on the name plate which is located on the pump hous-
ing above the inlet port. This specification should always be quoted in all correspondence with your dis-
tributor. 

The model specification (Type) describes the pump materials and options - see section 1.5
 
The manufacturing date (Mfg. date),
e.g. 090128 states year, month and day of
manufacturing.
 
The serial number (Mfg. No.) is a 
consecutive number registered at Albin Pump. 
 
The arrow on the name plate shows the flow
direction. 

1.2.2 - Storage

If the pump is not installed immediately it is recommended to store it in a dry, clean and cool location.
 
The pump is tested with compressed air in a completely dry condition so there is no liquid left in the pump.

Albin Pump AB

Ålegårdsgatan 1
43150 Mölndal, Sweden
Tel. +46 (0)31 701 38 30
Fax +46 (0)31 22 14 37
www.albinpump.se

since 1928

TYPE:
S.No:

AD0030PPT
090128-0001

Albin AD

FLOW

 DIRECTIO

N

AD Instruction Manual-2011EE-GB.indd   4

25/07/11   09:45

Содержание AD120





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды