alberta EUROSEC, Инструкция по эксплуатации

Страница: 3 / 5

How do I switch on/activate the alarm system?
Press button
C
and leave the premises immediately.
Enter the 4 digit code followed by the button
A
and leave the premises immediately.
How do I switch off the alarm system?
Enter the 4 digit code only.
How can I change the code?
Enter the 4 digit code, press
G
times 3, press
E,
press
G,
press
E,
select which code to edit between 1 to 9, press
G,
enter your desired 4 digit code & press E. Press button F for 3 times.
If I am in a panic situation and I need to call for help,
what can I do?
Press button
1
& button
3
simultaneously and keep them pressed for 2 seconds.
If the alarm rings,
how can I know which sensor triggered it?
Enter the 4 digit code to switch off the system. System will show you the exact zone which has been triggered.
Enter the 4 digit code to switch off the system and if the alarm shows
!!!!CHECK!!!!
on display,
press the 4 digit code again and press button
F
.
What do I have to press if there is a power cut to make
sure that my alarm is set properly when the electricity
is back on?
Enter the 4 digit code and press button
D.