1.
General description
Congratulations for your purchase of the Alberici
HopperOne S11!
This hopper has been designed and
realized in the Alberici research laboratory. It fulfils all the requirements of the coin-op market. This belt-drive single-
denomination dispensing device makes use of the most modern electronic and mechanical technologies. It is secure,
enduring, and reliable.
1.1
Range of use
This hopper can count the amount of coins paid out, and to stop dispensing when empty. To this purpose,
it makes use of a significant quantity of control routines for the management of the internal and external
events.
It builds-ups easily into Gaming machines, Money Changers, Kiosks and Vending Dispensers.
These features make it easily compatible with all the cards normally available on the market.
1.2
Security
The HopperOne S11 can be connected to and disconnected from its slide connector only when power
supply is off. The installation must be carried out as specified in paragraph 2.3. Guarantee shall not
apply if such instructions are not complied with.
This device includes mechanical parts
moving fast during operation:
DO NOT
put your fingers inside it while the
device is connected to power supply
.
.
2.
Main features
The HopperOne S11 cctalk is available in 2 different versions, according to the respective positions of the electrical
connector and the coins outlet. When they are located at opposite sides, the version is named
“STANDARD”; when
they are located at the same side, the version is
named “REVERSE”.
The standard features of the HopperOne S11 make it interchangeable with similar devices already existing in the
market. It can handle any coins whose diameter ranges between16 mm and 32 mm (choose the most convenient
belt for your purpose: 16-24mm, or else 22-32mm). Coin thickness can range between 2,0 mm and 3,4 mm.
DANGER!
MECHANICAL PARTS
IN MOTION