M12 Taximeter User Guide. © 2016
Alberen Electronics
12
When it is pressed to extra button, extra fee is increased up to unit extra fee which loaded
to the taximeter.
11.
CLOSING THE TARIFF
After the tariff is opened;
It should be pressed button firstly to close the tariff. So, total fare is shown sub screen as
shown below.
If a printer is connected to the taximeter, it can be selected”
“ by pressing button
again as shown below.
After selected “
”
or ”
”
, pressed button. If 10 seconds have passed after
button pressed, the taximeter will pass to the “FOR HIRE” position. Otherwise, taximeter
waits for 10 seconds in the “FARE” position. If selected
, the printer prints a receipt.
12.
ENTERING MENU
It can be reached to the menu by pressing button in the “FOR HIRE” position. All
information (as counters, setting parameters, etc) are shown in menu.
Structure of the menu is shown in menu table at the below.
