Alberding A10-RTK, Инструкция по эксплуатации

Страница: 28 / 31

A10-RTK Instruction Manual
7 Configuration
7.1 Alberding Configurator software
To configure the A10-RTK sensor with the Alberding Configurator software, the A10-RTK must be
connected to the PC via the serial port or Bluetooth (see chapter 6.2).
The configuration software Alberding Configurator is available for download under the following
link and includes the configuration tool as well as the required USB driver for Windows systems
(see User manual configurator.pdf):
https://www.alberding.eu/en/A07_support.html
7.2 Linux board
In order to communicate with the Linux board on the A10-RTK , the A10-RTK sensor must be
connected to the PC via Ethernet. Then programs or scripts can be installed.
This connection can be performed by the network administrator or you can use the following steps
for
Windows :
1. With the free and open-source software PuTTY , a connection to the A10-RTK can now be
established: ssh euronav@10.50.X.XX (IP address (Alberding GmbH))
2. Attention: A password is requested to establish an SSH connection. Alberding GmbH will
provide you with this password.
28