Installing Label Identifiers
4200-088
13-1
Revision 1.03
13.
Installing Label Identifiers
The UXSM and UXBM devices have a place to install a label identifier as to show what the device is
monitoring. A peel and stick label sheet (2400-065) will be included for each string being monitored.
The UXBM will require each section of numbers to be cut to the
appropriate
cell numbers that are
actually monitored by the UXBM. For example, if the first UXBM is monitoring one four cells then cut the
number 1-4 which is one continuous strip and place on the unit in the label identification area.
Figure 40 - UXBM Label Placement
There is a separate label for the UXSM as shown below.
Figure 41 - UXSM Label Placement
