Mainboard PXP35 (V2.0)
1
Chapter 1. Getting Started
Introduction
Thanks for choosing PXP35 (V2.0) Mainboard. It is based on Intel
®
P35 Northbridge chipset
and Intel
®
ICH7 Southbridge chipset. It supports Intel
®
Core
TM
2 Quad/ Core
TM
2 Extreme/
Core
TM
2 Duo/ Pentium
®
D/ Pentium
®
4/ Celeron
®
Processor with FSB (Front Side Bus)
frequencies of 1333 MHz/ 1066 MHz/ 800 MHz.
The PXP35 (V2.0) provides four DIMM (Dual In-Line Memory Modules) sockets which
allowing you to install 240-pin, unbuffered non-ECC, DDRII 800/ 667/ 533 SDRAMs. It also
supports Dual Channel Technology and allows you installing a total memory capacity of 8 GB.
This mainboard provides one PCI-E x16 interface slot up to x16 mode and two PCI-E x1
interface slots up to x1 mode can be supported individually. It is recommended that you can
insert a graphics card onto the PCI-E x16 slot, and an expansion card which the interface is
capable for PCI-E x1 specification. In addition, three PCI slots come with this mainboard and
are capable for use with expansion cards.
The PXP35 (V2.0) provides one floppy disk drive connector that can be used with
360KB/720KB/ 1.2MB/1.44MB/2.88MB drives. It also has one IDE connector compatible with
IDE hard drives supporting Ultra ATA 33/66/100. Moreover, this mainboard comes with Serial
ATA II support with four SATA II connectors which provide up to 3 Gbps data transfer rates.
The onboard High Definition Audio CODEC (ALC883) supports high quality performance
8-channel audio play (Super 7.1 Channel Audio Effect)
<See Appendix I>
. The mainboard
also supports the Sony/Philips Digital Interfaces (S/PDIF) input/ output function.
The PXP35 (V2.0) also comes with an onboard 10/100/1000 Mbps Ethernet LAN chip. There
is a LAN port on the back panel of your case that you can directly plug into an Internet cable.
There are maximal eight USB2.0/ 1.1 ports which can be set up on this mainboard.
All the information (including hardware installation and software installation) in this manual are
for reference only. The contents in this manual may be updated without notice. The company
will not assume any responsibility for any errors or mistakes within.
