Albatron PX865PEC PRO(2.0), Руководство пользователя

Страница: 6 / 24

Chapter 1. Getting Started
Introduction
Thanks for ainboard! It is based on the 865PE Northbridge
chipset and th
®
Pentium
®
4 (Northwood/ Prescott)
Pr SB (Front Side Bus) frequency of 800/533/400 MHz.
The 86 kets using 184-pin DDR SDRAM with a total
capacity o DDR400/ 333/ 266 (PC3200/ 2700/
210 DR
The PX865PEC PRO(2.0) mainboard provides one x8 AGP Slot with AGP 3.0 specification and five
32-b
CI
T board includes two built-in IDE facilities that support Ultra ATA
33/6 00 ities that support a
tran rat
The 865 hich supports
high y/
Phil Dig IF-IN function
is an optio
The PX865PEC ts to set maximal eight USB 2.0 ports.
M a LAN chip which provides the back
panel LAN port
A is manual only for reference. This specification is subject to change
w
choosing the PX865PEC PRO(2.0) m
e ICH5 Southbridge chipset. It supports Intel
ocessors with a F
PX 5PEC PRO(2.0) mainboard provides 4 soc
f up to 4GB. You can install unbuffered & non-ECC
0) S AM.
it P Slots.
he PX865PEC PRO(2.0) main
6/1 BMIDE and PIO Modes. It also includes two built-in Serial ATA facil
sfer e to 150 Mbps.
PX PEC PRO(2.0) mainboard comes with an AC’97 Sound Codec (ALC655) w
quality 6 channels audio function (Super 5.1 Channel Audio Effect). It also supports Son
ips ital Interface (S/PDIF) function (SPDIF-OUT function is onboard, but SPD
nal facility).
PRO(2.0) mainboard also suppor
or er, eov the PX865PEC PRO(2.0) mainboard comes with
ansfer rate. capable with 10/ 100 Mbps tr
ll of the information in th
ithout notice.
1