PX865PE7 PRO/ PX865PE7
26
Performance Enhancement
slicing several
cess times and reducing conventional latency factors. Preliminary tests have
can be increased about 3%~5%.
is set to “Enabled”.
s
conflict that the OS cannot
nabled
assign IRQ DMA and memory base address fields, since
ch system interrupt a type, depending on
t. This is only configurable when “Resources Controlled By” is
PCI device
his item allows you to set up the PCI Latency Time (0-255). If you select the “32” it will optimize
PCI speeds. Options: 0-255
、
32 (default)
Allows you to enable “Performance Enhancement Mode” in FSB800/ DDR400 mode, using PEM
can employ a specially configured “short cut” or “by pass” when accessing memory,
clock cycles from the ac
shown that system performance and efficiency
Options: Disabled (default)
、
Enabled
Extreme Timing
Enabling this item can enhance system performance, but may also cause your system to become
unstable. This item will be selectable when the “Performance Enhancement”
Options: Disabled (default)
、
Enabled
O.C DRAM Stability
This item can enhance DRAM stability when overclock the CPU frequency. This item will be
selectable when the “Performance Enhancement” is set to “Disabled”.
Options: Standard (default)
、
Optimized
PnP/PCI Configuration
Reset Configuration Data
Select “Enabled” to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card
the system reconfiguration has caused such a serious
and
boot. Options: Disabled (default)
、
E
Resources Controlled By
BIOS can autom tically configure all the boot and Plug and Play compatible devices. If you choose
a
Auto, you will not be able to manually
BIOS automatically assigns them. Options: Auto (ESCD) (default)
、
Manual
IRQ Resources
When resources re controlled manually, you can assign ea
a
the type of device using the interrup
set to “Manual”.
assigned to
Options: IRQ-3/ 4/ 5/ 7/ 9/ 10/ 11/ 12/ 14/ 15
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (default)
、
Enabled
PCI Latency Timer (CLK)
T
