Mainboard PM945GZ
10
USB Ports/LAN Port: JUSB2, JRJ45USB1
There are four onboard USB 2.0/ 1.1 ports on the back panel. These USB ports are used to attach with
USB devices, such as keyboard, mice and other USB supported devices. There is also a 10/100 Mbps
Ethernet LAN port available for you to attach an Internet cable.
Audio Ports: JAUDIO1
This mainboard provides three audio ports, the Mic-in, Line-in and Line-out. These are the standard audio
ports that provide basic audio function.
Line-In
(
Blue
)
This port is for audio input and connects to external audio devices
such as CD player, tape player, etc. When the multi-channel audio
system is enabled, this port will output audio for the rear speakers.
Line-Out
(
Green
)
This port is an output audio port used for connecting to speakers or a
headset. When the multi-channel audio system is enabled, this port
will output audio for the front speakers.
Mic-In
(Pink)
This port is for connecting to a microphone. When the multi-channel
audio system is enabled, this port will output audio for your
subwoofer/center speakers.
Pin Assignment Pin Assignment
1
TX+ (TX+)
5
NC (TRD2-)
2
TX- (TX-)
6
RX- (RX-)
3
RX+ (RX+)
7
NC (TRD3+)
4
NC (TRD2+)
8
NC (TRD3-)
Pin Assignment Pin Assignment
1/5
+5 V (fused)
3/7
USBP0+/P1+
2/6
USBP0-/P1-
4/8
Ground
This mainboard supports Super 5.1 Channel Audio Effect, and you can transfer
2-channel to 6-channel audio by using a SPDIF Card (Optional) to enable 6 speaker
audio. See
Appendix I
for more information.
