K8X800 PRO II Mainboard
35
IDE DMA transfer access
This item allows you to enabled or disabled the IDE DMA transfer access.
ptions: Enabled (default)
、
Disabled
he mainboard chipset contains a PCI IDE interface with support for two IDE channels. Select
nabled” to activate the first and/or second IDE interface. Select “Disabled” to deactivate an
terface if you are going to install a primary and/or secondary add-in IDE interface. Options:
nabled (default)
、
Disabled
E Prefetch Mode
he “onboard” IDE drive interfaces supports IDE prefetching for faster drive access. If you install a
rimary and/or secondary add-in IDE interface, set this option to “Disabled” if the interface does not
pport prefetching. Options: Enabled (default)
、
Disabled
rimary/Secondary/Master/Slave PIO
he IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE
evices that the onboard IDE interface supports. Modes 0 to 4 will increase performance
he system automatically determines the best mode for each device.
rimary / Secondary /Master / Slave UDMA
nality can be implemented if it is supported by the IDE hard drives in your
perating environment requires a DMA driver (Windows 95 OSR2 or a third
MA/133, select “Auto” to enable BIOS support.
se known as block transfer, multiple commands, or multiple sector read/write.
de (most new drives do). The
to read and write per sector.
I Device
el and then press the enter key, it will take you a
ons:
O
IDE Channel0/1
T
“E
in
E
ID
T
p
su
P
T
d
incrementally. In Auto mode, t
Options: Auto (default)
、
Mode0
、
Mode1
、
Mode2
、
Mode3
、
Mode4.
P
Ultra DMA/133 functio
system. As well, your o
party IDE bus master driver). If your hard drive and your system software both support Ultra
D
Options: Auto (default)
、
Disabled
IDE HDD Block Mode
Block mode is otherwi
Select the “Enabled” option if your IDE hard drive supports block mo
system will automatically determine the optimal number of blocks
Options: Enabled (default)
、
Disabled
OnChip PC
If you highlight the “OnChip PCI Device” lab
submenu with the following opti
