Alba 411012, Инструкция по эксплуатации

Страница: 28 / 44

Using your Mono DAB/FM Radio
Let’s get started
Using your Mono DAB/FM Radio
28
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
10. Press and release the Prev or Next buttons to set the volume for your alarm. Press and
release the Select button.
Note:
Remember to set the alarm radio volume to one that will wake you. The alarm
volume will increase progressively until it reaches the alarm volume you have set.
11. Alarm 1 Wizard is displayed again, together with Alarm Off (or On). Press and release
the Prev or Next buttons to choose Alarm On or Off and press and release the Select
button to confirm. Alarm Saved is displayed.
12. A bell symbol in the display, together with the digit ‘1’ or ‘2’ as appropriate, will confirm
that an alarm has been set.
Note: If the time is not set or has failed to update from the radio signal, Time is not set
will be displayed when you try to set the alarm. The radio will then prompt you to set
the time. An alarm can only be set after the time has been set.
Stop the Alarm
When the alarm sounds, press and release the Power button, Alarm off is displayed.
Alternatively, you can press and release the Snooze button (see Snooze function below).
Note: If you press the Standby button to stop the alarm, the alarm symbol will remain in
the display and the alarm will sound again at the same time the next day, unless it was
set for ‘Once’ only.
Snooze
When the alarm sounds you can press and release the Snooze button. There are 4 Snooze
time options available of 5, 10, 15 and 30 minutes.
1.
Press and release the Snooze button once to snooze for 5 minutes.
2. Repeatedly press and release the Snooze button to choose from 10, 15 or 30 minutes.
Stop when the Snooze time you would like is displayed.
3.
Your radio will now display the snooze time countdown until the alarm sounds again.