The
Stand Installation pack comes with two different
types of screws.
fi g 1)
Attach the stand neck to the rear of the TV set.
fi g 2)
Secure the neck to the TV using the
(A)
3 x M (4x12) screws provided.
fi g 3)
Peel off the protective plastic cover then attach
the stand base to the stand neck.
fi g 4)
Secure the base to the neck using the
(B)
4 x ST (4x12) screws provided.
10
For any help concerning set up and use of your TV please call the
Customer Helpline: 0871 2000 463
To complete the stand installation you will require a cross head screw driver.
Attaching The Stand
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on fi rst installation) the screw/s will be
naturally tight as they create a thread in the plastic of the stand neck in order to support a TV of this size.
a)
Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.
b
) Screw in all screws individually and partially before tightening all of the
screws fully.
c)
If they become very tight try loosening them slightly and then re-tightening them once again as this will
continue the process of creating the thread for the screws.
3 x
M (4x12)
1
1/2
4 x ST (4x12)
1
2
3
4
(B) 4
x ST(
4x12
)
(A) 3
x M(
4x12
)
User Guide - Alba- 236-207 ALB-MAN-0002.indd Sec1:10
User Guide - Alba- 236-207 ALB-MAN-0002.indd Sec1:10
12/10/2014 10:32:50 AM
12/10/2014 10:32:50 AM
Содержание 24/207
Страница 30: ...ALB MAN 0002...
