MAGNET-LESS CYCLING
SPEED / CADENCE SENSOR
Quick Start Guide
PLACE BATTERY
2
3
1
O
P
E
N
O-ring
O
P
EN
4
OPEN
Twist the battery cover counter-clockwise to
OPEN
to remove the cover.
Place the battery (CR 2032) into the cover with positive (+) side facing the
inside of the battery cover. Make sure the O-ring is in the groove of the battery
cover.
To replace the battery cover, aligned the cover dot with
OPEN
.
Press and twist the cover clockwise back into place (the cover dot points to
LOCK
).
Check the battery back cover is indeed locked to ensure water resistance.
1
2
3
4
5
Ala cycling (Compatible with
other APP, like as Wahoo fitness)
Compatible with iPhone 4S or
later, and with selected Android
devices using Android 4.4 or
later and support Bluetooth 4.0.
APPS
(Android / iOS)
FEATURES
Dual Band Technology
The sensor can connect to both
smartphones and ANT+ bike computers
via its ANT+ and Bluetooth capabilities.
Wireless Connection
The sensor wirelessly track speed or
cadence while cycling. Easy installation,no
magnet required
.
Accurate Measurement
Provides you with accurate speed and
cadence data during your ride.
IN THE BOX
Ø50
Ø26.4
Ø57
Ø63
1
3
5
2
4
6
Speed Sensor
Hub rubber pad
Cadence Sensor
Crank rubber pad
Crank rubber ring
Hub rubber ring
INSTALLATION
Used As A Speed Sensor
Note1, 3
If you do not have two sensors and use one of
them as a speed sensor, please skip this task.
Select the smallest size hub rubber ring that
can fits your wheel hub securely.
Place the sensor on the hub rubber pad with
logo facing up. Hold them on top of the wheel
hub.
Pull the hub rubber ring around the wheel hub,
and attach it to the hook on both sides of the
sensor.
Rotate the wheel for detection
Note2
, the sensor
should not
move and touch other parts of your bike.
1
2
3
4
Used As A Cadence Sensor
Note1, 3
If you do not have two sensors and use
one of them as a cadence sensor, please
skip this task.
Place the sensor on the crank rubber
pad with logo facing up. On the
non-drive side, hold them on the crank
arm.
Pull the crank rubber ring around the crank arm, and
attach it to the hook on both sides of the sensor.
Rotate the crank arm for detection
Note2
, the sensor
should not
move and touch any part of your shoe or bike.
1
2
3
ALATECH
SC003