ALAT UJI MS6612, Руководство пользователя

Страница: 18 / 36

MS6612 Multi-functional Light Meter
25
LCD, and the mode will return to auto measurement mode. Press and hold max/min value inquiry key
⑤
for a short time, “MAX” will appear on top position of LCD interface, switching the device to the max/min
value inquiry mode; in this mode, each short press of the key causes the mode to change from MAX to
MIN or from MIN to MAX; press and hold the “MAX/MIN” key
⑤
for one second, “MAX/MIN” on top
position of the LCD interface will disappear, and the mode will exit. Press and hold the data hold/zero
calibration key
⑦
of the MS6612 for a short time to enter the data hold mode, which will be indicated by
the apparition of “HOLD” on the top left position of the LCD interface; press and hold the key for a short
time once again, “HOLD” will disappear from the top left position of the LCD interface, and the device
will exit the data hold mode. In any mode with sensor covered, press and hold data hold/zero calibration
key
⑦
for one second, “ADJ” will appear on the LCD interface, and the device will enter the zero
calibration mode: several seconds later “ADJ” will disappear from the LCD interface, and the device will
exit the data hold mode and return to auto measurement mode.