PACKING LIST
GPS tracker, car charger, home AC charger, manual.
BEFORE USE
You will need a GSM phone SIM card which has SMS and incoming caller ID service capability. Install this SIM card in the tracker.
Please note the SIM card phone number which is your gateway to the many functions and features such location request, add &
delete preset number, changing password, enable over speed alarm, enable move alarm etc.
1. Power ON / OFF
When the power is OFF, press the
“
ON/OFF
”
button until the LED is ON, then release the button. The tracker is powered
ON, when the LED flashes. This confirms that the tracker is working well.
When the power is ON, press the
“
ON/OFF
”
button till the LED turns off, then release the button, the tracker is then OFF.
When the power is OFF, if you recharge the tracker, the tracker will power on automatically when the DC connection is made.
When the battery voltage in the tracker is too low, the tracker will power off automatically
2. Install SIM card: Pull out the battery cover and remove the battery, you can see the SIM card holder under the battery, move the
metal cover to the other side, and you can then lift one side of the metal cover. Then put the SIM card into the holder
(metal
pin face down)
, and fasten the cover.
Note: Before installing or uninstalling the SIM card, please turn off the tracker.
3. LED flash indicator
Green Power LED Flash once
: Working well
Green Power LED Flashes twice
: GSM working well but the GPS signal is weak
Green Power LED Flashes three times
: GSM and GPS working well but the battery is low
Green Power LED Flashes four times
: GSM is working well, but the battery is low and GPS signal weak
Green Power LED ON continuously
: Searching network
Green Power LED OFF continuously
: Power off
Blue GPS LED ON
: GPS module is ON
Red GSM LED Flashes fast
: incoming or making a call or receiving a SMS
