7
TEST LOCK OPERATION
Before testing, be sure the lock has been powered-
up using the specific instructions in the OI310,
OI311 or OI312 manuals.
1. With key removed, ensure that the lever CAN ONLY
be pushed down (not up), and the latch should NOT
retract while pushing down the lever with the key out.
2. Release lever. Insert key and turn key fully
counter-
clockwise
.
3. Depress the lever and the latch should retract.
4. Turn key clockwise and remove key.
The lever
must not
retract the latch when pressed
down.
5. While pressing the default access code on the lock
keypad (press "1
2
3
4
5" on the DL1200 and press
"1
2
3
4
5
6" on the DL/PDL1300), note the following:
•
For each number key pressed, the red LED lights.
•
When the "5" button is pressed (or the "6" button
on the DL/PDL1300):
1. The green LED flashes for approximately 5
seconds, and then
2. The latch is retracted when the lever is pushed
down
6. Test the exit device mounted inside (paddle / egress
bar, etc.) and confirm it is operating correctly.
SEE PROGRAMMING INSTRUCTIONS OI310,
OI311 or OI312 FOR KEYPAD PROGRAMMING
INFORMATION.
Latch
retracted
Test Step 1
Test Step 2
Test Step 3
Test Step 5
Test Step 4