25
;
6
7
;
[ _ _ ]
:
(Event Number)
67. Add System Features
SYSTEM FEATURES
68. Delete All Features added by Function 67.
;
6
8
;
0
0
0
:
4
•
System Options
24. One Time Access for Group 3 Users***
25. Disable Sounder
26. 5 sec. Delayed Entry *
27. 15 sec. Delayed Entry *
28. 45 sec. Delayed Entry *
•
Remote Input Functions
29.
Toggle Passage Mode.
Remote Input toggles Passage
Mode.
30.
Forced Unlock Follows Remote Input.
** When Remote
Input switch is closed, regardless of the current state of the
lock, the lock unlocks for the duration of the Remote Input
switch closure.
32.
Remote Input Disables Unit.
**
Regardless of the current
state, that state will remain unchanged (and keypad will be
disabled) for the duration of Remote Input switch closure.
34.
Forced Lock Follows Remote Input
** When Remote Input
switch is closed, regardless of the current state of the lock, the
lock will lock for the duration of the Remote Input switch clo-
sure.
* Features 26, 27 & 28 will delay User Codes 12 and higher only (except 297, 298 and 299).
** Features 30, 32 & 34 should be used with External DC Power unless feature is used for short a duration and infrequently (sustained
closure of remote input or relay will drain batteries). Scheduled events will not occur during sustained closure of remote input.
Sustained closure of remote input may affect proper audit trail operation. .
NOTE:
Enter
;
6
7
;
0
0
0
:
to
delete all above features added by Function 67 (identical to Function 68).
***
Feature 24, "One Time Access for Group 3 Users", allows the creation of multiple 'one time only' User Codes. When activated, an entry by
a Group 3 User allows entry only once, then user becomes disabled.
Note:
When the User Code is entered for the first time and access is
granted, the Event Log will read "Entry" followed by "User Disabled". If the User Code is entered a second time, access will be denied, and
the Event Log will read "User Denied Access".
To Enable the Feature:
Enter Program Mode and enter the key sequence
;
6
7
;
2
4
:
.
To assign the selected User Codes to Group 3:
For example, to assign User Number 15 to Group 3, press:
;
3
5
;
1
5
;
3
:
.
•
PC Communication Functions
33. Remote Input Puts Unit in PC Communication Mode
Enter
;
6
8
;
0
0
0
:
to delete all Features added by Function 67.
4
Programming Functions (cont'd)
