Alarm Controls Corporation KP-100A, Руководство пользователя

Страница: 26 / 32

7 26
NOTE:
1) Momentary Contact
-- The Egress Delay starts to count when the egress button is momentarily
2)
3)
The Egress Delay does not affect the operation of the User Codes for Output 1. The User
(4) VALIDATION
Press key once. Two-Echo Tones confirms the entry
EXAMPLES:
Example 1
: Set Egress Button in Momentary contact of 5 seconds with delay & warning tone
(a) (b) (c) (d)
(a)
Egress function programming,
(b)
Momentary contact with warning,
(c)
Delay time of 5 seconds
to release door, (d) Entry confirmation
Example 2:
Set Egress Button in Holding contact of 10 seconds with warning tone
(a) (b) (c) (d)
(a)
Egress function programming,
(b)
Holding contact mode with warning,
(c)
Holding time of 10
seconds to release door, (d) Entry confirmation
Example 3
: Set Egress Button in Momentary contact without delay (This is the default setting)
(a) (b) (c) (d)
(a)
Egress function programming,
(b)
Momentary contact without delay,
(c)
Release door instantly,
(d)
Entry confirmation
When finished press * * to exit PRogramming Mode.
pressed. Output 1 activates automatically (door is released) when the delay time is reached.
Code
s always give
INSTANT
action.
Holding Contact
-- The user
MUST
hold the egress button in contact for the whole period of the
Egress Delay time until Output 1 activates. If the egress button is released before the end of the
Egress Delay, the timer will stop to count and reset.
For safety, it is necessary to put a sign telling how to open the door if “Holding Contact” is
enabled. Check with AHJ for proper sign location and size.
Example: A sign for an egress button that is programmed with “Holding Contact” of 5 seconds.
Press & Hold The Button
5 Seconds Minimum
Until The Door Is Open